Tabletop design makes the FinishMaster 100 portable and easy to set up. Our feeder design ensures consistent and true feeding throughout the job. The accessory holders, each individually adjustable, allow easy blade changes to minimize set-up time and effort. The anvil-style perforating provides a flat, burr-free finish capable of being fed through any subsequent finishing equipment with ease. And with a maximum production rate of 10,000 sheets per hour, the "100" makes short work of your perf/score/slit needs. Don't forget...the FinishMaster 100 can be upgraded at any time to either the "150" or "200".

Only $4,385.00

From the floor model design, to the 30 inch-long register board, to the conveyor outfeed delivery, everything about the FinishMaster 150 spells productivity. Operating at speeds up to 20,000 standard-size sheets per hour, the "150" is ideal for mid to long run finishing. Anvil-style perforation provides a burr-free flat finish. Blades can be changed in seconds, without removing any shafts. A 5-year limited warranty, combined with the ability to upgrade to the FinishMaster 200 at any time make the "150" the only affordable solution.

Only $6,995.00

The GW Junior is a full featured tabletop numbering machine ideally suited to the smaller printer requiring in-shop numbering. No special operator is required. The machine uses less than a square foot of space, has a rugged construction with solid state electronics to ensure years of trouble-free performance.

Only $1,540.00

The GW 3000 is designed as a mid-volume, automatic number/perf/score/slit machine, ideal for the printer who does more numbering than can be efficiently accomplished on a hand fed machine. With a production rate of 3,000 standard size sheets/sets per hour, the "3000" makes short & easy work of mid-volume runs. Simple set up and ease of operation ensure quality results. Perforating, scoring, and slitting is done before the main rollers on depth controllable holders allowing for fast blade changes.

Only $7,010.00

The most popular number/perf/score/slit machine in the business. Operating at speeds up to 6000 sheets per hour, the "6000" makes fast and easy work of your finishing needs. With the ability to upgrade to another model at any time in the future, combined with a 5-year limited warranty, you can't go wrong with the "6000".

Only $8,150.00

Heavy duty construction makes the GW 8000 ready to run all day, every day. A 100-job memory provides a fast job change over. Microprocessor control give the operator the ability to position up to 100 numbers per head, anywhere on each sheet. Feature for feature, spec for spec, it is the best value in the industry. Don't forget...the "8000" can be field-upgraded to the "12000" at any time.

Only $9,770.00

Identical to the 8000E, the 8000P adds pneumatics to the mix. Pneumatically propelled numbering heads provides for "extra-long" numbering run length, as well as the ability to add the optional strike perf attachment. Compressed air is necessary, however.

Only $10,395.00

This fully automatic pneumatic numbering system with double shafts (DS) gives users greater productivity and versatility. Now, a four-up job can be numbered and easily processed with only a single pass through the machine. More productivity equals more profit.

Only $10,225.00

Capable of tireless, all day, every day running. Versatile and high speed. With features similar to the "8000", the "12000" adds higher production speeds while maintaining register and accuracy. From the 30 inch-long register board, to the individually pressure adjustable perf/score/slit, to the tireless pneumatic heads, to the conveyor outfeed delivery, everything about the GW 12000 is designed for years of trouble-free operation. All this and more at a cost per feature and specification unmatched in the industry.

Only $13,945.00

Impact creasing evolved because of the growing digital market, and the difficulty in finishing their printed material. There are three models to choose from: the CreaseMaster, CreaseMaster Pro and CreaseMaster PLUS. The CreaseMaster comes standard with Graphic Whizard's unique friction feed; the CreaseMaster Pro uses a stream fed by hand system; while the CreaseMaster PLUS uses our "digital-friendly" horizontal air/suction feed.

Graphic Whizard electronics are the backbone to the CreaseMaster, and are the result of over 15 years of development and field-use on similar products.

Only $995.00

Impact creasing evolved because of the growing digital market, and the difficulty in finishing their printed material. There are three models to choose from: the CreaseMaster, CreaseMaster Pro and CreaseMaster PLUS. The CreaseMaster comes standard with Graphic Whizard's unique friction feed; the CreaseMaster Pro uses a stream fed by hand system; while the CreaseMaster PLUS uses our "digital-friendly" horizontal air/suction feed.

Graphic Whizard electronics are the backbone to the CreaseMaster, and are the result of over 15 years of development and field-use on similar products.

Only $7,800.00

Impact creasing evolved because of the growing digital market, and the difficulty in finishing their printed material. There are three models to choose from: the CreaseMaster, CreaseMaster Pro and CreaseMaster PLUS. The CreaseMaster comes standard with Graphic Whizard's unique friction feed; the CreaseMaster Pro uses a stream fed by hand system; while the CreaseMaster PLUS uses our "digital-friendly" horizontal air/suction feed.

Graphic Whizard electronics are the backbone to the CreaseMaster, and are the result of over 15 years of development and field-use on similar products.

Only $13,880.00